top of page

XCarve All-in-One Laser and Mounting Kit Bundle

Easy All-in-One Laser and Mounting Kit ordering for your X Carve CNC.


All the choices to add a laser to your X-Carve in one place.


1. Pick your Laser Wattage:

There are 4 wattage levels to choose from (1W2.8W4.2W or 7W).  Most customers go with the 4.2W.  The lower power has a lower price, but will take longer to do the same burn level in an engraving.  The 4.2W will go 2x as fast and the 7W will go 4x as fast for the same burn level as the 2.8W.  The 2.8W has a bit finer detail, but you can also get the high resolution lens option for the 4.2W and the 7W lasers.


2. Choose Standard or if you have a Dust Boot:

Standard XCarve or Dust Boot compatible, works with Suckit and Inventables dust boot.


3. Do you want the Magnetic Shrouded Version?

Upgrade to our new Laser Shroud for added safety.  Click Here for details on our new Laser Shroud.  All non shrouded lasers will include a magnet base for use with the magnet mounts.  Both the shroud and the magnet base can be screwed into the mount if you don’t wish to use the quick connect option.


The standard kit comes with:

  • Laser diode component with mounting screws

  • Laser Shroud or Magnet Base Plate

  • Adjustable Safety Compliant Laser Diode Driver

  • Power Cord

  • Laser Safety Goggles for 445nm Lasers

  • Laser Fan

  • Laser Quick Connect Magnet Mount

  • 3 foot Mini Molex Jr. Input Cable

  • Mounting Screws

  • Driver Mounting Sticky Squares

  • 10 foot Laser and Fan Extension Cables

  • Zip Ties and Zip Tie Holders

bottom of page